3. Ultrasonic Surgical System
The Mesic Ultrasonic Surgical Instrument is made up of three main components: a Generator, Handpiece, and Ultrasonic Shear. The ergonomic grip housing assembly includes hand and foot control buttons for adjusting the power level between the minimum and maximum settings. This tool allows surgeons to cut and coagulate tissue at the same time.The Ultrasonic Shear uses a clamp to apply compression to the tissue, enabling precise cutting and coagulation. This technique results in minimal lateral thermal spread and avoids the use of electricity.
Product Info :
- The Line frequency of the device is 50/60Hz, with a mains voltage of 100-240V (±10%). It has a T5AH 250V main fuse (quantity: 2) and a maximum power consumption of 150VA. The device has a width of 350mm, a height of 355mm, and a depth of 136mm, with a weight of 7.6kg. It features an LCD display of 7 inches and belongs to Class I, CF type of protection class according to EN 60601-1. The device has an output frequency of 55.5±0.5KHz and an output power of 35 watts maximum.
- Ambient conditions for storage and transport include a temperature range of -35°C to +54°C, a relative humidity of 10% to 80%, and an atmospheric pressure of 70 kPa to 106 kPa. For operation, the temperature range is from +15°C to +27°C, with a relative humidity of 30% to 75%, and an atmospheric pressure of 70 kPa to 106 kPa. The TM MESIC Ordering Information includes four different sizes of disposable shears (14cm, 23cm, 36cm, and 45cm) with the respective codes MUS14, MUS23, MUS36, and MUS45. The handpiece is available with the code MUHP-01, and the generator with the code MUGEN-01. The device also offers an optional footswitch, with the code MUFS-02.
4. Irillic .Nm
Navigate to point of interest wit.nm is a state-of-the-art fluorescence imaging system that gives surgeons the ability to visualize real-time fluorescence for tissue perfusion and lymphatic flow and navigation. The simple hand-held design of the .nm Fluorescence Imaging System which allows surgeons to navigate and make real-time decisions with ease.
Product Info :
- Setup and use in < 3 minutes.
- Navigate to point of interest with real-time fluorescence visualization.
- Capture contrast flow videos.
- Capture Hi-Q images.
- Instantly store/repeat videos and images.
- Maintain patient records and generate reports.
- Share studies with other physicians.
- with.nm fluorescence imaging tissue perfusion,vascularity assessment and lymphatic flow and navigation.
- with.nm makes the process simple.
5. Hand Held Surgical Robotic System
The HandX® is a lightweight, compact handheld smart laparoscopy solution. HandX® allows the surgeon to perform complex minimally invasive surgeries (MIS) using a device that combines the benefits of surgical robotic-based platforms with the simplicity and affordability of traditional laparoscopic surgery.
Product Info :
- HandX® is a 5mm, fully articulated, SW driven handheld Robotic platform, and offers enhanced degrees of freedom (DOF) for MIS.
- FDA cleared.
- CE-marked (MDR).
6. Laparoscopic Hand Instruments
(a) Pareva
(b) Laproflex
Optimal freedom of movement and intuitive operation for the surgeon with a simple wrist movement, the surgeon can accurately steer the tip of the LaproFlex in all directions, while the tip of the instrument can be rotated 360°
Product Info :
- With a simple wrist movement, the tip of the instrument can be angled at 60° in all directions.
- Rotate the tip 360 degrees from the handle for the ideal position to grip, manipulate and cut. Both shaft and hand can stay in position.
- The handle is designed to accommodate the natural position of the hand, resulting in intuitive operation.
- The LaproFlex can be used in a 5 mm trocar and has a shaft length of 320 mm.